manualshive.com logo in svg

Valtra HiTech T133 H, Operator'S Manual

Share
Download
Valtra HiTech T133 H Operator'S Manual Download Page 221

1

2

GUID-90B7436B-F0FA-487B-931D-B5F086BEEC95

1. Towing pin locking lever

2. Towing pin opening lever

1. Lift the towing pin up.

To lift the pin, turn the opening lever to the upper position.

2. Attach the trailer to the coupling.

When the draw eye reaches the bottom of the draw gap, the towing pin

automatically goes down. You can also lower the towing pin by pushing the

lowering lever downwards.

3. Check that the towing pin is locked.

1

2

GUID-BA8488DE-C3E5-4789-B584-23A51901F313

1. Towing pin not locked

2. Towing pin locked

WARNING: The drawbar pin is locked in the down position when

the security knob is out. When attaching the trailer, the drawbar

locking pin must be secured.

3. Operation

- 220 -

Summary of Contents for HiTech T133 H



















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands