VALTIR ENERGITE III, Assembly And Maintenance Manual

Page: 16 / 24

www.valtir.com 15 Revision F November 2022
FITCH ® UNIVERSAL MODULE (lbs) FILL HEIGHT FROM TOP (inches)
200 12
400 8.5
700 6
1400 Top
2100 Top
Figure 8-Fitch ® Universal Module
ENERGITE ® MODULE (lbs) FILL HEIGHT FROM TOP (inches)
200 8.5
400 5
700 4
1400 3
2100 0
Figure 9 - Energite
®
III
Caution:
If the modules are located where freezing temperatures might occur,
mix the sand with 5% rock salt by weight to prevent the sand from freezing. Be
sure the salt is evenly dispersed in the sand.
11) Lid Placement
The lids can be snapped firmly into place. After the first row is finished, the next row of
modules can be positioned, filled, and the lids snapped on until all the rows are
completed. Be sure the lids are snapped firmly into place to prevent water and debris
from entering the barrels, which can adversely affect the system’s performance.
Alternate Assembly Option
1) The Energite
®
Barrels feature a convenient one-piece design with a solid bottom. This
allows the modules to be fully assembled and filled at a remote site and then transported
to the deployment site. The fully-assembled modules can be lifted on and off the truck
using a crane and lifting device.
2) Barrels may be placed on 100 mm (4”) maximum height pallets for temporary assembly.
Proper Sand Levels
Proper Sand Levels