Version 2018.1
www.valoya.com
+358 10 2350 300
ELECTRICAL CONNECTION PROCEDURE
1) Connect luminaire together by plugging the female connector from one luminaire to the male connector of the next
luminaire. Do not connect more than 16 luminaires together!
2) Connect the end-cap (ZHPF8148) to the female connector of the last luminaire of the chain.
3) Connect your mains lead to the first luminaire in the chain.
4) Connect to the main supply.
Luminaire Connection
Installation Instructions
IMPORTANT:
Maximum 16 luminaires to be connected to one 16A Type C MCB. Higher rated MCB use is not permitted. Use of an incorrectly
rated MCB will cause a potential safety risk and invalidate product warranty. Valoya are not liable for any damage or injury
sustained through incorrect electrial connection.
Failure to install the end-cap to the lest luminaire will compromise the luminaire IP rating and invalidate warranty.
1
2
3
4
9
Wieland mains input connector connection
Connect your incoming mains cable to the Wieland RST female connector (ZHPF8144) as shown below.
Live
Neutral
Earth
Incoming cable
Incoming cable
1
2
3
