37
Installation
Contents
1 Wall Bracket A
2 Screws B
1 Screw C
2 Wall Anchor D
1 Spacer E
(detach before
assembly)
1 Wall Bracket F
Switch Plate
Alternative 1
Alternative 2
Alternative 3
Install Handset Wall Holder
The remote ontrol kit for this
fi
replace comes complete
with a wall-mounted holder. This holder is not required
in all installations but is provided as an optional feature
for those customers who wish to mount the remote
handset to the wall. To install the holder to the wall,
fi
nd
a convenient location and use the hardware provided
with the kit. See the diagram for required hardware and
con
fi
gurations. Note that the holder can be installed at
the base of a light switch plate.
IMPORTANT:
The location of the remote control
handset is important to assure proper temperature
regulation. To obtain a constant temperature, we
recommend that the handset should be between 3
and 15 feet away from the appliance
but not directly
above it
. We also advise that the handset should
be located away from any other heat source and not
in direct sunlight as this may a
ff
ect the temperature
sensor located in the remote handset.
QUALIFIED
INSTALLER
Summary of Contents for Retrofire RF24KBN
Page 44: ......
