35
Install Barrier Screen to Window Cover
A barrier screen is supplied with this appliance to install
on the Retro
fi
re window cover. The barrier screen
is designed speci
fi
cally to prevent any contact with
the glass of the
fi
replace which becomes hot during
operation and remains hot when cooling.
It is easier to install the screen on the window cover
fi
rst, before hooking the window cover to the
fi
replace:
1. Hook the top of the screen by inserting the tabs into
the slots in the window cover.
2. Push the screen up and insert the lower tabs into
the slots of the window cover. Pull the screen down
to ensure the lower tabs are well inserted.
Install Window Cover and Barrier Screen
Hook the window cover with screen attached to the top
of the
fi
rebox. Push the bottom against the
fi
rebox to
attach the magnets.
Installation
1
2
Install Top Vent Shield (if necessary)
The top vent shield is designed to install on top of the
fi
rebox in front of the vent plate to hide the vent plate
and vent liners when visible.
Cut the top of the vent shield to size if necessary and
place it in front of the vent plate as indicated..
QUALIFIED
INSTALLER
Summary of Contents for Retrofire RF24KBN
Page 44: ......
