7
28. The access door opens and closes using the screw
at each end as a hinge.
To close the door, rotate it upward and push it
straight away from you. When closed, the tab at
each end of the door goes underneath the lower
support bracket to hold it from falling open.
To open de door, pull it straight towards you then
rotate it downward.
Cast Front and Barrier Screen
29. Finish the installation of the engine: fuel bed,
window, perform all checks and adjustments.
30. Install the screen to the back of the cast front with
4 screws provided.
31. Hook the cast front already fi tted with the barrier
screen to the engine’s top hooks.
Tab goes under
lower bracket
lower bracket
WARNING
DO NOT TOUCH THE STOVE WHILE IT IS HOT!
DO NOT TOUCH THE STOVE WHILE IT IS HOT!
Let the stove cool fi rst before cleaning it.
Let the stove cool fi rst before cleaning it.
WARNING
!
Maintenance
Cast iron and stove body
Dust down the surface regularly with a soft brush and
occasionally follow up with a wipe over with a wet cloth.
Barrier screen
Remove the front and barrier screen by unhooking the
front. Dust down using a brush.
If the barrier becomes damaged, the barrier shall
be replaced with the manufacturer’s barrier for this
appliance.
Window and fi replace
NOTE:
DO NOT use ammonia cleaner for the
fi
replace window
.
See the
Owner’s Information
section in the Madrona
MF28 fi replace Owner’s Manual for instructions on
cleaning the window and fuel bed.
FOR SAFETY PURPOSE, ensure the barrier
FOR SAFETY PURPOSE, ensure the barrier
screen is always on the stove front after
screen is always on the stove front after
maintenance if it has been removed.
maintenance if it has been removed.
WARNING
!