background image

4003648-04

Madrona Traditional Stove Casing

MFCS01

 

(black - 2 styles)

 or MFCS02 

(Majolica brown - 2 styles)

CSA approved for use with 

Valor Models MF28 Heaters ONLY

MFCS01 or MFCS02
Madrona Traditional Stove 
Casting - Arched front

MF28—Madrona Engine

(

sold separately)

Installation Instructions

MF28—Madrona Engine 

(

sold separately)

MFCS01 or MFCS02
Madrona Traditional Stove 
Casting - Square front

M

ADRONA

© Copyright Miles Industries Ltd., 2015

Notes: 

This kit must be installed or serviced by a qualifi ed in-

staller, service agency or gas supplier. These instructions are to 
be 

used in conjunction with the main installation instructions 

for the above listed heater models.

The application of this kit does not affect the venting capa-
bilities or method of preparation of the MF28 heater as de-
scribed in the MF28 heater installation manual.

To complete the installation 
of this kit you need the 
following items:

•  MF28 Madrona Engine

• Black 

Arched 

model:

• MFCS0

1-1

 + MFCS0

1-2

•  Black Square model:

• MFCS0

1-1

 + MFCS0

1-3

• Majolica 

Arched 

model: 

• MFCS0

2-1

 + MFCS0

2-2

•  Majolica Square model:

• MFCS0

2-1

 + MFCS0

2-3

I N S TA L L E R

Leave this manual 

with the appliance.

C O N S U M E R

Retain this manual 

for future reference.

HOT GLASS

 WILL 

CAUSE BURNS.

DO NOT TOUCH 

GLASS 

UNTIL COOLED.

NEVER 

ALLOW CHILDREN 

TO TOUCH GLASS.

DANGER

!

A barrier designed to reduce the risk of burns from the hot 
viewing glass is provided with this appliance and shall be 
installed for the protection of children and other at-risk 
individuals.

Overview

Summary of Contents for MADRONA MFCS01

















Reviews: