37
Liners
Installation
Installing a Glass Liner
The 2100RGP Re
fl
ective Glass liner is installed di
ff
erently
than the ceramic liners.
1. Loosen (but do not remove) the screw next to the
panel retaining bracket in the roof of the
fi
replace,
and slide the bracket away from the wall.
2. Slide the liner in from either side, between the wall
and the light rail and retaining bracket.
3. Slide the retaining bracket against the liner and
tighten the screw.
4. Fold the bottom clip along its perforation into a right
angle, as shown.
5. Slide the bottom clip down onto the metal edge at
the bottom of the liner.
Liners are fragile,
never force one into place.
If you have di
ffi
culty inserting the liner from
one side, remove the opposite window and
install from the other side.