35
4. Pull the inner cover and receptacle (attached) out of
the
fi
replace.
5. Thread the cable through the stud and the strain
re
fl
ief in the
fi
replace case.
Do not tighten the
clamp yet.
Pull as much wire through the case as
you need to wire the receptacle outside the case.
6. Strip wire and terminate grounded receptacle using
wire nuts (not included). Place the connected
receptacle back in the
fi
replace, and pull excess
cable back through the strain relief.
Installation
Electrical Wiring
7. Place the inner cover and receptacle in position and
secure with 2 screws.
8. Leave desired cable slack in the electrical box,
tighten the strain relief cable clamp outside the
fi
replace and secure any excess wire to framing.
9. Plug the V-Module’s AC plug into the power recep-
tacle.
