Designed and Manufactured by / for
Miles Industries Ltd.
190–2255 Dollarton Highway, North Vancouver, BC, CANADA V7H 3B1
Tel. 604-984-3496 Fax 604-984-0246
www.valor
fi
replaces.com
© Copyright Miles Industries Ltd., 2012
Reinstall the
fi
replace components
To reinstall the components removed for the conversion
or to complete the installation of the
fi
replace, see the
installation instructions supplied with the appliance.
1. Re
fi
t the ceramic panels
fi
rst, then the front brick
support and the rear log support (3 screws).
2. Reinstall the grate (with logs only), the fuel bed, the
window, the front trim and the left side access door.
Fit the conversion labels
1. Fit the conversion label with new speci
fi
cations over
the corresponding speci
fi
cations on the data plate
attached to the
fi
replace at right hand side between
the
fi
rebox and the outer case of the appliance.
2. Fit the label
“This appliance was converted on...
by...”
near the data label
fi
tted in 1.
3. Reinstall the right side access door.
4
