Valor ITS-703W, Owner'S Manual

Page: 4 / 26

Disconnecting the Battery
To prevent a short circuit, be sure to turn off the ignition and remove the negative (-) battery
cable prior to installation.
NOTE:
If the unit is to be installed in a car equipped with an on-board drive or navigation computer, do
not disconnect the battery cable. If the cable is disconnected, the preset memory may be
erased. Under these conditions, use extra caution during installation to avoid causing a short
circuit.
NOTE:
It is especially important that you read the WARNINGS and NOTES in this manual.
2
Please read all of the instructions below before beginning your installation. We recommend that you have your unit
installed by an experienced 12 volt electronics installer.
Features
• Single DIN size, all-in-one integrated entertainment system.
• Built-in DVD Player, Car specification slot-in mechanism.
• Built-in ISS FM/AM Tuner,
• High resolution 7” (16:9) TFT color monitor, contrast and brightness adjustment, with LCD dot
matrix display.
• Built-in 45W X 4 amplifier, 4.1 channel surround sound output.
• Smart Touch-screen operation.
• All functions can be operated by the included remote controls.
• Built-in Satellite Radio Control, Built-in iPod Control.
• Powerful Graphic User Interface and software update ability.
Tools and Supplies
You will need these tools and supplies to install the unit.
• Torx type, flat-head and Philips screwdrivers
• Wire cutters and strippers
• Tools to remove existing radio (screwdriver, socket wrench set or other tools)
• Electrical tape
• Crimping tool
• Volt meter/test light
• Crimp connections
• 18 gauge wire for power connections
• 16 – 18 gauge speaker wire
Warnings
1. Only connect the unit to a 12-volt negative ground system.
2. Never install this unit where operation and viewing could interfere with safe driving
conditions.
3. To reduce the risk of a traffic accident (except when using for rear view video camera) never
use the video display function while driving the vehicle.
4. To reduce the risk of a traffic accident, never driving with the sound at a level that prevents
you from hearing sounds outside around the vehicle.
5. Never disassemble or adjust the unit without the assistance of a professional. For details,
please consult your local car stereo specialty shop.
6. To prevent injury from shock or fire, never expose this unit to moisture or water.
7. Never use irregular discs.
8. To prevent damage to the mechanism inside this unit, avoid impact to the TFT monitor.
9. Do not change the fuse on the power wire without professional guidance. Using an improper
fuse may cause damage to the unit and result in a fire.
10. The monitor employs an automatic motorized mechanism. To prevent damage to the core
mechanism, please do not push, pull or swivel the monitor manually.
Preparation
1