INSTALLER’S GUIDE
Page 20
Figure 20. Front Base Coal
Position
Figure 19. Rear Base Coal
Position
Figure 18. Ceramic Rear Wall
Position
1 0 F I T T I N G T H E C E R A M I C S
1
.
Fit the ceramic rear wall into the bracket at the
back of the firebox .See figure 18.
2
.
Place the rear base coal in the firebox. It should
rest on the ledges at the sides and back of the firebox
and its rear face should touch the rear ceramic wall.
See figure 19.
3
.
Place the front base coal in the firebox with its
bottom front locating over the front rim of the
firebox. Pull the coal forward so that it locates
immediately behind the front rim of the
firebox. See figure 20.
There are two types of loose coals. These are
identified with the letter “A” or “B” on the
underside of the coal.
There are three “A” coals and two “B” coals.
