INSTALLER GUIDE
Page 5
©
Baxi Heating U.K. Limited 2008.
CONTENTS
Section
Heading
Page
INSTALLER GUIDE
4 - 41
OWNER GUIDE
42 - 52
1. SAFETY
6
2. ACCESSORIES
6
3. APPLIANCE DATA
7
4. GENERAL INSTALLATION REQUIREMENTS
8
5. PACK CONTENTS
16
6. FIREPLACE CHECK
18
7. IGNITION CHECK
19
8. GAS SUPPLY CONNECTION
20
9. PREPARING APPLIANCE FOR INSTALLATION
20
10. CONVECTION BOX INSTALLATION
23
10.1 Method 1 - Front fixing to fireplace surround.
23
10.2 Method 2 - Cable retention and floor fixing.
23
10.3 Sealing floor front - All installations.
25
11. BURNER AND SUPPLY PIPE INSTALLATION
26
11.3 Inlet pressure check.
27
12. FITTING THE CERAMIC FUEL EFFECT
27
13. FITTING THE GLASS PANEL
28
14. FULL OPERATING CHECKS
28
14.2 Check for spillage.
29
14.3 Flame supervision and spillage monitoring system.
30
15. OUTLET BAFFLE AND FASCIA FITTING
30
16. FINAL REVIEW
32
17. SERVICING & PARTS REPLACEMENT
33
17.1 Checking the aeration setting of the burner.
33
17.2 To remove the ignition microswitch.
34
17.3 To remove the gas shut-off microswitch.
34
17.4 To remove the fascia.
35
17.5 To replace the control slide unit.
35
17.6 To replace the control slide button.
35
17.7 To remove the glass panel.
36
17.8 To remove the window assembly.
36
17.9 To remove the ceramic side walls.
37
17.10 To remove the electronic ignition generator.
38
17.11 To remove the complete burner unit.
38
17.12 To remove the thermocouple interrupter block.
38
17.13 To remove the pilot unit.
39
17.14 To remove the shut-off tap.
39
17.15 To remove the gas flow rate controller.
40
17.16 To replace the burner.
40
17.17 To remove the main burner injector.
41
17.18 To remove the appliance from the fireplace.
41