background image

Never

Never

leave children unsupervised in a room where the heater is ON and

unguarded.

Never

use the heater in a small room when occupied by persons not able to leave

the room by themselves unless constantly supervised. 

Never

obstruct or cover the fan outlet or force items into heater openings.

Never

install or use the heater anywhere where water or high humidity is in use,

i.e. Bathrooms, Kitchens, Shower Rooms and Swimming Pools etc. 

Never

use aerosols or steam cleaners on or around the heater.

Never

route the electric cable under carpet etc.

Never

install the heater close to curtains or combustible materials.

Never

use the heater to dry clothes etc.

Never 

sit or stand on the heater.

Never 

use the heater with a timer switch or similar device.

Important Electrical Safety

The heater must 

not

be located in front of or under an electrical socket; the socket

must always be accessible in order to disconnect the heater from the electrical supply
for maintenance and cleaning.

CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut out,
this appliance must 

not

be supplied through an external switching device, such as a

timer, or connected to a circuit that is regularly switched on and off by the utility.

Important! This heater must be earthed. 

The heater is supplied with a 3 pin 13 Amp fused moulded plug with 1mm² 3 core
cable.

The wires in the cable are coloured in accordance with the following code:-

Live =

Brown

Neutral = Blue
Earth = 

Green 

/Yellow

The electric supply must be safely routed from the heater to an electrical socket. 
If the electric cable is damaged, to avoid a hazard it must be replaced by a Valor
authorised service agent, or similarly qualified person

.

All external wiring between

the heater and the electrical supply shall comply with current IEE regulations.
Extension leads should not be used.

INSTALLER AND OWNER GUIDE

Page 5

© 

GDC Group Ltd. 2011

Summary of Contents for 855 Dimension

























Reviews: