10. FITTING THE FASCIA
Fitting the Blenheim fascia frame.
1.
Remove the fascia frame from its
packaging.
2.
There are four magnets supplied.
Locate the magnets to the heater body
(See figure 17).
Ensure that they are
located correctly before fitting the fascia
frame.
3.
Locate the fascia frame onto the
heater.
Fitting the Blenheim fascia trims.
1.
Remove the fascia trims from the
packaging.
2.
There are six magnets supplied.
Locate the magnets to the heater frame
(See figure 18).
Ensure that they are located
correctly before fitting the fascia trims.
3.
Locate the fascia trims onto the frame. Ensure that
the side trims are located before the top trim.
Fitting the firefront and ash pan.
1.
Remove the firefront from its packaging.
2.
Locate the firefront casting.
3.
Position the ash pan beneath the firefront.
INSTALLER AND OWNER GUIDE
Page 16
©
GDC Group Ltd. 2011
Figure 18.
Figure 17.
