background image

What you need to do if you experience a problem with the operation of the heater; 

Read section 12 of this guide “Cleaning the heater”. If the problem cannot be
resolved simply call our service division 

heateam

on

08706 090 081

to book an engineer visit or for any general advice that you may need.

Our contact centre is open Monday to Friday 8am – 6pm, weekends and Bank
Holidays 8.30am – 2pm, excluding Christmas Day and New Years day.

When calling 

heateam

, it would be helpful if you could have the following information

to hand:-

1.

Heater serial number

2.

Heater brand and model number 

3.

Date of installation

4.

Proof of purchase (If you do not have the heater serial number)

Note: Details 1 – 3 can be found on the last page of this guide.

What this warranty covers

Free of charge repair or replacement of components found to be of faulty
manufacture.

Free of charge replacement of the complete unit providing the failure is related to a
manufacturing fault that cannot be repaired or is uneconomic to repair.

What this warranty does not cover

Repairs to heaters which haven’t been installed properly and as set out in this guide.

Faults caused by inadequate supply of electricity.

Reimbursement of any third party repair or replacement costs that we haven’t been
told about or agreed with you in advance.

Compensation or consequential losses (e.g. loss of earnings, business losses, stress
and inconvenience) arising from a production breakdown, including repair delays
caused by factors outside our reasonable control.

INSTALLER AND OWNER GUIDE

Page 21

© 

GDC Group Ltd. 2011

Summary of Contents for 855 Dimension

























Reviews: