26
4. Place log H22 at the right end of G4, on top of the
cover panel.
5. Place log G15 from the cover panel to the groove in
H22.
6. Place log H20 from the left side of G4 to the top
groove of G15.
H22
G4
G15
H22
H20
G15
G4
7. Place log H17 as shown. Note the hole in H17
fi
ts
onto the pin in H15.
8. Place log H36 as shown. Note the hole in H36
fi
ts
onto the pin in H15.
9. Place embers as shown on the cover plate. You may
not need to use all the embers.
H17
H15
H15
H36
Installation
Fuel Beds
