39
39
(appliance shown without its front frame and baf
fl
es for clarity)
Rear view detail—window assembly with window
baf
fl
e hooked on frame
Appliance front view
Window Baf
fl
e
Safety warning plate
Installation
Re
fi
t and Check Window, Install Window
Baf
fl
e
1. Slide the window inside the appliance case and rest
it on the
fi
rebox front bottom tabs. Re
fi
t the bottom
two bolts. The bolts should be screwed in securely.
2. Re
fi
t the top two bolts securing by turning them
through 90 degrees.
3. Hook the window baf
fl
e to the top of the window
frame.
Be careful not to hook it onto the fi rebox
frame—see images below
.
appliance top frame
window frame
cut out heat baf
fl
e
(for clarity)
window baf
fl
e
window baf
fl
e
IMPORTANT:
To ensure a safe operation, ensure that
the spring-loaded mechanism functions properly.
4. Grab the top of the window and baf
fl
e and pull them
forward and release to check that the window opens
slightly and returns con
fi
rming the good function of
the spring-loaded mechanism.
5. Similarly check the bottom of the window by pulling
it forward and releasing.
6. Apply light hand pressure against the window frame
sides to bed in the window seal.
7.
If the Hot Glass Warning plate has been removed
from the front lower corner of the window,
reinstall it by sliding it between the glass and
the frame as indicated.
fi
rebox
frame
window
frame
QUALIFIED
INSTALLER
