INSTALLER’S GUIDE
Page
30
Fit the brackets marked
‘ ’
to the rear of the
firefront. To do this
position the brackets so
that the hook is to the
bottom and facing the
centre of the firefront.
The large holes in the
brackets should sit
around the screw heads at
the top of the firefront
(See figure 43). Secure
the brackets using the
four screws supplied.
2.
Locate the firefront
as in figure 44.The hooks should fit
into the slots on the burner tray.
3.
The lower ‘ashpan’ should be
located as in figure 45.
Figure 45. Lower ‘ashpan’
location
Figure 44. Hanging the firefront
Figure 43. Bracket locations
