Valor 530XAN, Installation And Owner'S Manual

Page: 6 / 52

6 of 50
2.0 OPTIONS
Heater engine unit # 530 X is available in either natural
gas or LPG and comes equipped with either a simulated
log or coal fuel bed in either fuel. The 530X engine unit is
supplied standard with a rear vent D.V outlet and may be
converted to a top outlet D.V with no extra parts required.
The parts required to make the engine suitable for zero
clearance are supplied with the various front trims (except
549 front)
2.1 Appliance styles
President FS Free standing cast stove.(See fig. 1),
President 536 For recessed application, either zero
clearance or insert . (See figure 2)
Windsor Arch
539/549
Arched Cast Iron Front for recessed
application, either zero clearance (see
fig 3) or insert (see fig 4 ). (549
version is insert only )
Bolero 541 Contemporary cast iron front for
recessed application, either zero
clearance or insert(see fig 5)
One of the above kits must be used with each
installation.
2.2 Additional optional features
Circulating fan
Having variable speed and
temperature control, it is
designed to boost the natural
convection process through the
appliance. It may be fitted
before the fireplace is installed
or retrofitted at a later date –
Kit #555CFK .
3336 CP
Closure Plate
33” high x 36” wide black
closure plate with black
aluminum extrusion edge. To
cover openings for insert
applications.
2.3 LP Gas
LPG Conversion kit
Burner & injector kit for
conversion from natural gas to
propane –
Kit #554LPK .
2.4 Venting options
2.4.1 Direct vent installations (solid piping)
A list of all approved venting accessories is shown on
pages 48 and 49 of this manual.
2.4.2 Direct Vent Co-Linear Installations for
Free Standing or Recessed Installations
(flexible piping)
Converts the appliance outlet collars to accept two 3” dia.
Flex liners for installation into existing solid fuel burning
fireplaces and chimneys. Requires
556 CLA adapter and
923 GK termination kit along with either a 980 or 991
termination cap.( 923GCL may be used in lieu of 556
CLA adapter)
2.4.3 B-vent installations – For President
Free Standing only
Kit #552BVX converts this appliance from a direct vent
fireplace heater to a gravity vent fireplace heater for use
with a 4” “B” type vent. A full installation and operating
manual is supplied with the kit.