38 of 50
15.2 Ceramic Log Installation
(see section 15.3 for ceramic coal)
1.
Place the base log on the supports in the firebox and against the support at the firebox back. See figure 64.
2.
Locate the rear upper log on the two ceramic pins at the rear of the base log. See figure 65.
3.
Place the front log behind the metal strip at the front of the firebox. See figure 66.
4.
Locate the right middle log on the pin in the right hand side of the base log . See fig 67.
5.
Locate the left side log on the ceramic pin on the left hand side of the base log. Rest the narrow nose of this log on the
projection at the front center of the base log. –
Ensure that the narrow nose does not rest on the burner.
See figure 68
6.
Locate the right side log on the pin in the front log and rest the nose of this log on the projection on the base log –
ensure
that the nose does not rest on the burner.
See figure 68a.
Figure 64
Figure 65
Figure 66
Figure 67
Figure 68
Figure 68a
