9999
4.1.4
Position the rear right coal (embossed "D" on its underside) in the
well in the coal bed marked "D" - see figure 10. The pointed rear of the coal
should rest on the ledge in the "V" cut-out at the rear of the well in the coal bed
marked "D". The other two corners of the coal should rest on the ledges at the
front and right side of the well in the coal bed.
4.1.5
Position the rear left coal (embossed "E" on its underside ) - see
figure 11. The groove underneath coal "E" should locate over the narrow
ridge (also embossed "E") situated toward the rear left of the coal bed.
The left side of coal "E" should drop behind the high point at the front of
the vertical ridge. The back edge of coal "E" should touch the front face
of the back line of coals in the coal bed.
4.1.6
Replace the window unit. Locate its bottom edge in the support
channels at the firebox sides. Refix the knurled screws at the sides near
the top.
4.1.7
Replace the window trim.
Fig. 11 Coal “E” Location
Fig. 10 Coal “D” Location
