44
Installation
Installed glass plate
WARNING
CHOKING HAZARD!
Ensure that the
fi
replace
area is clear of
fi
reglass particles as these could
be ingested by small children. Vacuum area after
installation.
!
2. Install the glass plate on the platform, the textured
side underneath and the smooth side on top. The
plate is
fl
ush with the edge of the burner. Like for the
steel platform underneath, push the glass platform
as far back as possible to maximize the air gap
behind the burner.
3. Fill a small container with approximately 3 cups
(750 ml) of mixed
fi
re glass.
4. Carefully spread the
fi
reglass on the surface of
burner patting it gently with your hand to form a
single layer to the approximate level of the top edge
of the
fl
ange around the burner. Do not pour too
much to avoid blocking the burner ports.
5. Some
fi
reglass may be added on the platform to
cover the edge of the burner and in the space in
front and behind the pilot shield.
NOTE:
Ensure the area
within
the pilot shield is
clear of
fi
reglass.
Pilot shield
QUALIFIED
INSTALLER
Summary of Contents for 1600IN
Page 62: ......
