47
8. Disconnect the wire from the battery box.
9. Remove the cover of the battery box (1 screw).
10. Insert four AA
alkaline
batteries in the battery box,
re
fi
t the cover and secure with the screw.
Note: Do not put batteries in the receiver, only in
the battery box.
11. Reconnect the battery box and place it back in its po-
sition to the right at the bottom of the appliance case.
12. Test the operation of the wall switch—see page 9.
13. Fix the wall cover plate to the outlet box.
14. Replace the receiver in its position and as well as
the antenna if deployed.
CAUTION
To avoid short-circuit to the receiver, position
the
antenna
so that it
DOES NOT TOUCH the
ignition wire.
Installation
QUALIFIED
INSTALLER
Summary of Contents for 1500INO (NG)
Page 56: ......
