16.8 To remove the main burner injector.
(See figure 46).
1.
Remove the burner (See section 16.7).
2.
Remove the burner clamping screw (See figure
46)
3.
Unscrew the injector from the burner.
4.
Refit in the reverse order.
16.9 To remove the appliance from the fireplace.
1.
Remove the burner unit (See section 16.2).
2.
If the fire retention is as method 1 (See section
10.1 of installation instructions), remove the screws.
If the fire retention is as method 2 (See section 10.2
of installation instructions), slacken the hexagonal
adjusters on the cable retainers and unscrew the thumbscrews to release the cables.
3.
Refit as described in the relevant installation sections. Make sure gas soundness,
sealing, spillage test and performance are satisfactory.
Page 40
©
Baxi Heating U.K. Limited 2008.
INSTALLER GUIDE
Figure 46. Main burner injector
removal
