Step 2
:
INSTALLING THE MAGNETS
It is really advisable to work in metric. This will simplify the task of
correcting the position of the magnets in the Pro-Feed program.
2.1 :
TRIANGLE OF REFERENCE
Drill the holes in the concrete. The holes should all be at the same
depth and not too deep, so that the magnet is almost level with the
concrete;
Clean the holes using compressed air;
Put epoxy glue or sillicone in the holes;
Introduce the magnets in the holes by following the diagrams below;
The two bottom magnets must be of different polarity. The third one
will be from one or the other.
(50cm)
20ʼʼ
(50cm)
20ʼʼ
(1m)
40ʼʼ
