14
5.1.3
LUBRICATING
1. Use the maintenance record provided in section
5.3 to keep a record of all scheduled mainte-
nance.
2. Grease both universal joints on PTO drive shaft
every 8 to 10 hours (see figure
3
).
3. Grease flange bearings on the 2 speed gearbox
drive shaft every 8 to 10 hours.
4. Grease flange bearings (3) on the opening door
system monthly
5. Planetary right angle gearbox : A grease line,
grease fitting located underneath the tub, is
intended to grease the planetary tower top bear-
ing (figure
2
). It must be greased once a year
with ten pumps of grease. This should be done
in conjunction with oil changes.
Fig.
2
Greasing planetary tower top bearing
Fig.
3
Lubrication
Summary of Contents for 400-STA
