4 Safety recommendations
Note:
These safety recommendations are based on a risk analysis carried
out in accordance with the requirements of the Low Voltage Directive
in order to comply with European standards for CE marking. Read
carefully all safety recommendations and instructions before installing
any parts of the delivery.
General instruction
Follow precisely the instructions and recommendations when installing, connecting, or
servicing the equipment. These safety recommendations apply to a sensor installed with
an AC-powered TCU.
Note:
Always use only parts manufactured or approved by Valmet
Automation. Follow valid instructions and standards during installation.
Installing and connecting the sensor
Caution:
Before installing any mounting parts, make sure that the process
pipeline is empty and depressurized!
Welding or bolting and the subsequent inspection must take place in accordance with
the valid standards and regulations.
Read the installation instructions in this manual.
• Use approved lifting equipment during installation.
• Ensure that the sensor is fastened properly.
Safety recommendations | 10 (48)
K20798 V1.1 EN - 1 - 12/2019