background image

4

 NOTE

For further information, 
go to www.vallox.com

INTRODUCTION

SAFETY

Safe and appropriate handling requires knowledge of the basic 
safety regulations, and of the intended use of the ventilation 
system. Read this manual before operating the ventilation unit. 
Retain the manual for later reference. If you lose the manual, it can 
be downloaded from our website.

This user manual contains all the information necessary for safe 
operation of the system. All persons who operate and maintain 
the ventilation system must follow the instructions provided in this 
manual. Furthermore, all local accident prevention regulations must 
be observed.

Installation

Installation and setup should be carried out only by qualified 
experts. Electrical installations and connections must be carried 
out only by an electrician and in compliance with local regulations. 

GUARANTEE

The guarantee and liability exclude damage resulting from:

• 

Inappropriate use of the ventilation system or the control unit

• 

Incorrect or inappropriate installation, setup or use

• 

Neglect of instructions concerning transportation, installation, 
use, or maintenance

• 

Structural or electronic modifications or changes made to the 
software

INTENDED USE

All Vallox ventilation units have been designed to provide 
appropriate and continuous ventilation so as to present no threat to 
health and to maintain structures in good condition.

IMPORTANT  

In order to ensure that the indoor air presents no harm to 
health and remains optimal also for the structures of the 
building, 

ventilation must be kept on without disruptions.

 It 

is recommended that ventilation be left turned on during long 
holidays also. This keeps the indoor air fresh and prevents humidity 
from condensing in the ventilation ducts and structures. It also 
reduces the risk of moisture damage.

DISPOSAL OF THE VENTILATION UNIT

Do not dispose of electronic devices with household waste. Follow 
local laws and regulations on safe and ecological disposal of the 
product.

 WARNING

The unit is not intended for 
use by children under 8 or by 
persons with reduced sensory, 
physical or mental capabilities, 
or whose lack of knowledge 
and experience do not ensure 
safe operation of the unit.

Such persons can use the 
unit under supervision, or by 
following the instructions of 
someone who is responsible for 
their safety.

Summary of Contents for Vallox TSK Multi 50 MV EH















Reviews: