26
USING THE UNIT
SETTINGS
FILTER SETTINGS
1. Select
Settings > Filters.
2. Select
OK
.
3. The summary display of filter replacement shows the
following information:
• Filters replaced
— Indicates the date when the filters were
last replaced.
• Next reminder
— Indicates the date when a reminder to
replace the filters will next be shown.
• Reminder interval
— Indicates the filter replacement interval
in months.
Setting the date the filters were last
replaced
Instructions for replacing the filters are provided in the
Maintenance section.
After replacing the filters, enter the replacement date.
1. Select
Settings > Filters.
2. Select
OK
.
3. Select
Edit
.
4. Select
Plus
on the Filter replacement display. The
Last
replaced
field now reads
Today.
5. Select
OK
.
NOTE
Based on the set reminder interval, the unit will automatically
set the service to provide a reminder to replace the filters at
the due time.
Setting the Filter replacement reminder
interval
1. Select
Settings > Filters.
2. Select
OK
.
3. Select
Edit
.
4. Select
Right arrow
.
5. Use
the
Plus
and
Minus
buttons to set the desired
reminder interval in months in the Reminder interval field.
The interval value can be between 1 and 12 months. The
default setting is 4 months.
6. Select
OK
.
