29
© Vallox Oy - All rights reserved
Setting the date
1. Select
Settings > Time and date.
2. Select
OK
.
3. Select
Right arrow
until the 4/4 display opens.
4. Use
the
Plus
and
Minus
buttons to set the date.
5. Select
Right arrow
.
6. Use
the
Plus
and
Minus
buttons to set the month.
7. Select
Right arrow
.
8. Use
the
Plus
and
Minus
buttons to set the year.
9.
Select
OK
.
WEEK CLOCK
The week clock allows you to pre-set a weekly ventilation
program for the ventilation unit. For each hour of the week,
one of the following profiles can be configured:
• At
home
— The
At home
profile is used.
• Away
— The
Away
profile is used.
• Boost
— The
Boost
profile is used.
•
Blank — Do not change the profile.
NOTE
If you change the profile manually when the week clock is
on, the selected profile will be active until the week clock
switches to the next profile in the program.
If the humidity or carbon dioxide sensors control the
ventilation, they will adjust the fan speed, regardless of
whether the profile has been manually selected or selected
by the week clock.
Turning the week clock on
1. Select
Settings > Week clock off.
2. Select
OK
.
3. Select
Settings
.
4. Select
Turn on.
5. Select
Select
.
6. The control panel confirms that the week clock is turned
on.
USING THE UNIT
SETTINGS
TIP
You can turn the week clock on
or off by pressing the OK button
on the Week clock display for a
few seconds.
