VALLOX DIGIT2 SE/VKL/MLV
© VALLOX • We reserve the right to make changes without prior notification.
17
INSTALLATION/Ceiling mounting
15
25
back edge
of the side
plate
back edge of the
ceiling mounting
plate
DET1
1:2
LOCKING WINGS
4 x ø 160 female
UNIT WEIGHT CA. 71 KG
596
548
45
8
569
15
25
DET1
9
46
-0.
0
+3.0
top edge of
side plate
bottom edge
of ceiling
mounting
plate
Ceiling mounting plate before
fastening
Location of DIGIT2 SE
DIGIT2 SE is mounted in a place where temperature does not fall below +10 ºC. Without
protective casing, the unit has to be located in a place with no acoustic disturbance:
storerooms, utility rooms etc. DIGIT2 SE can also be located in a damp room, but not
in a bathroom next to a sauna bath.
CEILING MOUNTING
VALLOX DIGIT2 SE can be equipped with an optional easy-to-use ceiling mounting plate
(patent pending). The ceiling mounting plate is fixed to the ceiling with M8 thread bars.
Fix the bars so that they stand the weight of the unit, i.e. approximately 71 kg.
The ceiling mounting plate has to be fixed horizontally in order to ensure that the unit will be
straight. The outdoor air duct must be insulated against condensation, also between the unit
and the ceiling mounting plate.
Installation
Lift the unit straight upwards, till the locking wings on the sides of the mounting plate lock
into the side plates of the unit. You can detach the unit from the mounting plate by
releasing the locking wings from the side plates.
To facilitate mounting, you may use a lubricant, such as O-ring grease, in the collar seals.
Mounting accessories include rubber silencers, base plates and nuts. Thread bars are
not included in the delivery.
Ceiling mounting of VALLOX DIGIT2 SE
