background image

-  16  -

STORAGE

Clean the tool and all its accessories thoroughly 

(see Maintenance section). Protect the unpainted 

parts with protective oil and use the original 

packaging or case (where fitted) to protect it.

Keep the tool out of reach of children, in a stable 

and safe position. The place must be dry, free 

from dust, temperate and protected from direct 

sunlight.

Keep children and unauthorised personnel out 

of the storage room.

DISPOSAL

In order to protect the environment, proceed 

according to the local laws in force. Contact the 

relevant authorities for more information.

When the machine is no longer usable or repai-

rable, deliver the machine and packaging to a 

recycling centre.

Electric and electronic waste may contain poten-

tially hazardous substances for the environment 

and human health. It should therefore not be 

disposed of with domestic waste, but by means 

of differentiated collection at specific centres or 

returned to the vendor in the event of purchasing 

new equipment of the same type. The illegal 

disposal of waste will result in administrative 

sanctions.

WARRANTY

The product is protected by law against non-

compliance with the declared characteristics 

provided it is used only in the manner described 

in the instructions, it has not been tampered with 

in any way, it has been stored properly, has been 

repaired by authorized and, where applicable, 

have been used only original spare parts.

In the case of industrial or professional use or 

when using such a guarantee is valid for 12 

months.

To issue a claim under warranty you must 

present proof of purchase to your dealer or 

authorized service center.

Summary of Contents for SG850

















Reviews: