- 11 -
PROBLEMS, CAUSES AND SOLUTIONS
PROBLEM
CAUSES
SOLUTIONS
The electrical
tool fails to
start
Battery empty
Fully charge the battery
Battery not correctly
inserted in the tool hou-
sing
Take out the battery and
insert it correctly
Rotation direction
switch in central lock
position
Move the switch to one of
the two positions R or L
The battery has overhe-
ated and the internal
auto reset protection
has cut in
Wait for the battery to cool
down
Electrical tool or battery
faulty
Replace the battery and/
or contact an authorised
service centre
The batte-
ry does not
charge
Battery not correctly
inserted in the battery
charger housing
Take out the battery and
insert it correctly
Batter y charger or
battery not ready for
charging.
Battery overheated.
Wait for the battery to cool
down
Battery charger or bat-
tery faulty
Replace the battery and/
or contact an authorised
service centre
T h e d r i l l
stops while
drilling
Battery empty
If available insert a new
charged battery, or take
out the battery and fully
charge it.
The battery has overhe-
ated and the internal
auto reset protection
has cut in
Wait for the battery to cool
down
!
!
IMPORTANT! If the electrical tool still fails to operate correctly
after you have carried out the above operations, or in the event of
anomalies other than those described above, take it to an authorised
service centre with proof of purchase and ask for original spare
parts. Always provide the information shown on the technical data
label.
WARRANTY
The product is protected by law against non-compliance with the de-
clared characteristics provided it is used only in the manner described
in the instructions, it has not been tampered with in any way, it has
been stored properly, has been repaired by authorized and, where
applicable, have been used only original spare parts.
In the case of industrial or professional use or when using such a
guarantee is valid for 12 months.
To issue a claim under warranty you must present proof of purchase
to your dealer or authorized service center.
Summary of Contents for LI-STRONG2V IMPACT 212
Page 12: ...12...