background image

-  15  -

and clean it regularly. In this way its efficiency 

will be ensured and its lifespan extended.

- Remove dust with a brush with soft bristles.

- Do not wet or spray water over the electrical 

vacuum cleaner - risk of internal infiltrations.

- Do not use any inflammables, detergents or 

solvents.

- The plastic parts can easily be damaged by 

chemical agents.

- Do not use compressed air for cleaning: Risk 

of material ejection!

- Be careful when cleaning the switch, the motor 

fan slots and the vacuum nozzle.

Every time it is used:

- Empty the collection box.

- Take out and clean the filter (fig.C). If washing 

is envisaged, dry it well before reassembling 

it, in order to prevent the formation of mould. 

- Unhook and replace the dust bag, if necessary. 

If it is of the reusable type (fabric), empty it 

and clean it.

REPLACING THE DUST BAG (fig.A pos.23)

Only use original spare parts suitable for your 

vacuum cleaner. Use eye protection and an 

anti-dust mask.

Open the latches (pos.7), remove the vacuum 

head (pos.2), unhook and remove the full bag 

and put in the new bag making sure it fits well. 

STORAGE

Clean the machine and all its accessories tho-

roughly (see Maintenance section). 

Keep the machine out of reach of children, in a 

stable and safe position. The place must be dry, 

free from dust, temperate and protected from 

direct sunlight. 

Keep children and unauthorised personnel out 

of the storageroom.

DISPOSAL

In order to protect the environment, proceed 

according to the local laws in force. Contact the 

relevant authorities for more information.

When the machine is not longer useable or 

repairable, deliver the machine and packaging 

to a recycling centre.

 Electric and electronic waste may contain 

substances that are dangerous for the envi-

ronment and for human health. For this reason 

they must never be disposed of together with do-

mestic waste, but collected separately in specific 

collection centres or returned to the retailer when 

similar new equipment has been purchased. The 

illegal disposal of such equipment may result in 

prosecution to the full extent of the law.

WARRANTY

The product is protected by law against 

non-compliance with the declared cha-

racteristics provided it is used only in the 

manner described in the instructions, it has 

not been tampered with in any way, it has 

been stored properly, has been repaired by 

authorized and, where applicable, have been 

used only original spare parts.

In the case of industrial or professional use 

or when using such a guarantee is valid for 

12 months.

To issue a claim under warranty you must 

present proof of purchase to your dealer or 

authorized service center.

Summary of Contents for APL1221

















Reviews: