Valex 1650151, Instruction Manual And Safety Instructions

Page: 8 / 8

10) While keeping the object still, fasten it making sure it
doesn’t fall, move, overturn, etc.
11) After making sure that the load is blocked in its position,
unfasten the product by raising up the tumbler switchers.
The human effort you will apply must be sufficient in relation
to the object weight, so if you encounter any difficulty, stop
the operation immediately.
Carry on by moving the object to its prearranged position;
move progressively and slowly, without shaking or making
sudden movements.
During the operation it is important not to touch the tumbler
switcher(s) because their movement would cause the
sudden drop of the load.
It is recommended to keep the suction cups on the load
only for the time required to complete the operation. Do not
leave the suction cups attached to the object for an indefinite
period of time.
MAINTENANCE
! !
WArNINg! Before every maintenance, place the load
on the ground and release it from the product.
CLEANING
Regularly clean and take care of your product: this will
guarantee its efficiency and long life. When cleaning the
product, check it and test it in order to find any possible
damage, malfunctioning, etc.
Remove the dust using a soft cloth.
Do not use flammable materials, detergents or solvents
of any kind as they may irreparably damage the product.
CHECKS
Always check the product before using it. The inspections
are compulsory and are required to prevent failures and
accidents.
Make sure the product has no deformity, cracks, bending,
cuts, crushing, tears or corrosion.
PrOBLEMs, CAusEs AND sOLuTIONs
Malfunctioning Potential Cause
solution
The load does
not fasten to
the suction
cup(s)
Air infiltrations
under the gum
disc
Press the suction
cup against the
object surface
and activate the
tumbler switch
Worn or broken
suction cup
Unusable product
Broken mechanic
tumbler switch
Unusable product
Dirty load
surface
Accurately clean
with a cloth
Load surface
not perfectly
flat, smooth or
hermetic
It is not possible
to move this type
of load
sTOrAgE
Accurately clean the whole product (see Maintenance) and
use the original packaging to protect it.
Store the product in a stable and safe position out of
children’s reach. The place must be dry, free from dust,
temperate and protected from direct sunlight. Keep children
and unauthorised personnel out of the storage room.
DIsPOsAL
In order to protect the environment, proceed according to
the local laws in force.
When the product can no longer be used or repaired, take
it with its packaging to a recycling gathering spot.
WArrANTY
The product is protected by law against non-compliance
with the declared characteristics provided it is used only
in the manner described in the instructions, it has not been
tampered with in any way, it has been stored properly, has
been repaired by authorized and, where applicable, have
been used only original spare parts.
In the case of industrial or professional use or when using
such a guarantee is valid for 12 months.
To issue a claim under warranty you must present proof of
purchase to your dealer or authorized service center.