background image

MUSIC MODE 

Any station set to this mode can listen to any other station 
being monitored, and can listen to music piped from the 
master station. 

Press MUS at any station to enable Music Mode for that 
station. The red status light will be on to indicate that Music 
Mode is on. 

The radio volume can be individually adjusted at each 
station. 

Press MUS again to disable Music Mode. 

MONITOR MODE 

Any station set to this mode can be listened to by other 
stations. For example, to ensure that a baby is sleeping 
soundly or that a sick child or an elderly parent is comfortable 
at night. 

TO SELECT MONITOR MODE: 

Press the MON button at the station to be monitored. (The 
green light will turn on to indicate the microphone is active). 

Select Music Mode at any other station to listen to the 
monitored station. 

Listening to monitored stations is more effective if the radio is 
turned off at the master station, (if fitted). 

Stations set to monitor mode will not respond to paging 
calls, door calls and door chimes but will respond to Select 
Calls which allows for communication to the station being 
monitored 

TO DE-SELECT MONITOR MODE: 

Press the MON button. (The green light will turn off). 

PRIVACY MODE 

This mode caters for situations where you want to prevent 
other stations from listening in to a particular room by disabling 
the station’s ability to reply to incoming calls. 

TO SELECT PRIVACY MODE 

Press the PRIV button at the station where privacy is required. 
(The green light will flash indicating the station is in Privacy 
Mode). 

TO DE-SELECT PRIVACY MODE: 

Press the PRIV button. (The green light will turn off). 

Outgoing calls can still be made while in Privacy Mode. 

NOTE:

 Music, Monitor and Privacy Modes will reset in the 

event of a power disruption. This can be overcome if an 
optional standby battery is used in conjunction with the power 
supply. (Ask your Local Distributor for further information). 

INTERCOM OPERATION 

SELECT CALLS 

A Select Call allows you to make an intercom call to a particular 
station or group of stations. 

Your installer will preset all your room stations with a number 
from 1 to 20, depending on the number of stations installed. 

To talk to another station, simply press and hold the button 
for that station, talk, then release to listen. 

If your system has more than eight stations, see the section 
“Making a Select Call – Double Digit Format”. 

MAKING A SELECT CALL - SINGLE DIGIT FORMAT 

Press and hold a CALL button (1–8) at the master station or 
any room station. The green light will turn on indicating your 
microphone is active. 

Talk at a normal level then release the CALL button to listen for 
a reply. The green light will turn off at your station and will turn 
on at the called station enabling the other station to reply. 

* Those replying to a call need not press any buttons. All 
replies are ‘hands free’. 

Continue the conversation by pressing the selected number 
to talk and releasing the selected number to listen. 

The system will automatically cancel a call if no buttons have 
been pressed for approximately 20 seconds. You can also 
manually cancel a call by pressing the CANCEL / CLEAR 
button. 

MAKING A SELECT CALL - TWO DIGIT FORMAT 

To call a station with a two digit station number, press the first 
digit of the station number on the CALL buttons at the master 
station or any room station. The red light will begin flashing. 

Press and hold the second digit of the station number on 
the CALL buttons. The green light will turn on indicating your 
microphone is active. 

Talk at a normal level then release the second digit button to 
listen for a reply. The green light will turn off at your station 
and will turn on at the called station enabling the other station 
to reply. 

* Those replying to a call need not press any buttons. All 
replies are ‘hands free’. 

Continue the conversation by pressing the second digit button 
to talk and releasing the second digit key to listen. 

The system will automatically cancel a call if no buttons have 
been pressed for approximately 20 seconds. You can also 
manually cancel a call by pressing the CANCEL / CLEAR 
button. 

SYSTEM ONE™ INTERCOM SYSTEM - USER MANUAL 

Summary of Contents for System One









Reviews: