INTERCOM OPERATION
PAGING CALLS
A Paging Call communicates to all other stations with the
exception of door stations and is the best method of speaking
to someone if you’re not sure where they are in the house.
TO PAGE ALL STATIONS
Press and hold the HOUSE button at the master station or
any room station. The green light will turn on indicating your
microphone is active.
Talk at a normal level then release the HOUSE button to listen
for a reply. The green light will turn off at your station and will
turn on at all receiving stations enabling all other stations to
reply.
When replying to a call you do not need to press any
buttons. All replies are ‘hands free’.
To hold a conversation, press and hold the HOUSE button to
talk and release to listen.
The system will automatically cancel a call if no buttons have
been pressed for approximately 20 seconds. You can also
manually cancel a call by pressing the CANCEL / CLEAR
button.
DOOR/GATE STATION OPERATION
When the Doorbell button is pressed at the front door station,
the electronic chime is heard at all stations.
Stations with their volume control turned down to minimum*
and the stations set in MONITOR mode
will not
hear the
doorbell chime,
To talk to a visitor at the front door station, Press and hold the
DOOR button at the master station or any room station. The
green light will turn on indicating your microphone is active.
Talk at a normal level then release the DOOR button to listen
for a reply.
The visitor does not need to press any buttons to reply. All
replies are ‘hands free’.
To hold a conversation, press and hold the DOOR button to
talk and release to listen.
The system will automatically cancel a call if no buttons have
been pressed for approximately 20 seconds. You can also
manually cancel a call by pressing the CANCEL / CLEAR
button.
AUXILIARY/LOCK OUTPUT
Electronic door locks, Automatic gates, Courtesy lights, Alarm
panic circuits, etc. can be controlled from the master or any
room station if optional auxiliary output boards have been
fitted to your system.
These outputs can be programmed to time out or toggle
depending on the application.
TO ACTIVATE AN OUTPUT:
Press and release the AUX button at the master or any room
station followed by a predetermined CALL BUTTON for the
device you wish to control
If the output is programmed to time out the device will de-
activate or reset after a predetermined period of time.
If the output is programmed to toggle the output will remain
on until the AUX button followed by the predetermined CALL
BUTTON is pressed again.
NOTE:
• For this Optional feature to be available the fitting of
Auxiliary output boards and additional wiring are required at
installation.
• Depending on the installation setup the door release may
need to be activated by pressing CALL button number 8.
•
•
•
•
to communicate.
Stations set to Monitor Mode will not receive PAGING or SELECT calls and will not hear the
DOORBELL.
Stations with volume control turned to minimum* will not receive PAGING or SELECT calls and will not
hear the DOORBELL.
Stations set to PRIVACY MODE cannot reply hands free.
Do not make a call if the red light is fl ashing as this indicates that someone is already using the system
* The master station will still hear the DOORBELL even if its local volume is set to minimum. Audio can be completely turned off
at the master station using the Audio Off Mode. See page 6.
8
SYSTEM ONE™ INTERCOM SYSTEM - USER MANUAL
