PLUG
PACK
DOOR
DOOR
STRIKE
STATION
STATION
STATION
STATION
ROOM
ROOM
ROOM
INPUT JACK
TYPE B
POWER
SUPPLY
VALET INTERCOM CABLE
FIGURE 8 CABLE
SINGLE CORE CABLE
NOTE: Single core cable not required if Aux/Lock boards not used
*
ROOM
STATION
DOOR
SUPPLY
INPUT JACK
TYPE B
POWER
SUPPLY
INPUT JACK
TYPE B
ROOM
ROOM
ROOM
ROOM
ROOM
ROOM
DOOR
STATION
STATION
STATION
STATION
STATION
STATION
STATION
MECHANICAL
CHIME
AUTOMATIC
GATE
PLUG
PACK
DOOR
STRIKE
VALET INTERCOM CABLE
SINGLE CORE CABLE
FIGURE 8 CABLE
NOTE: Single core cable not required if Aux/Lock boards not used
*
WIRING DIAGRAM
INPUT JACK
INSTALLATION OF DOOR/GATE
STATIONS
Depending on the type of wall to
which the station is to be affixed
i.e. timber or brick, door station
housing DSH may be needed.
Where stations are exposed to
extreme weather, a weather proof
cover should be fitted.
Green and orange wires are not
used at door station. Tape green
and orange wires back to white
outer sheath of valet cable.
Do not connect green and orange
wires of door station cable at room
station end. Tape back in same
manner as above.
Where a door station is part of a
wiring loop, the door station should
always be the last station on the
loop.
INSTALLATION OF DOOR STATIONS
POS (RED)
NEG (BLACK)
TC (SHIELDED RED)
VLC (SHIELDED WHITE)
MUS1 (GREEN)
MUS2 (ORANGE)
NOTE: For 6 Wire Systems
input jack to Com1 (White) an
Com2 (Blue) of room station.
. .
- Connect Green & Orange of
- Fit jumper to L1
L1
ORG
GRN
YEL
GRY
BLK
RED
NOTE: For 6 Wire Systems
input jack to Com1 (White) and
Com2 (Blue) of room station.
- Connect Green & Orange of
- Fit jumper to L1
POS
NEG
COM1
COM2
TC
VLC
SHLD
CH
VR3
VR2
VR1
U5
SEL
PROG
RED
BLACK
WHITE
BLUE
SHIELDED WHITE
SHIELDED RED
OUTER SHIELD
GREEN
ORANGE
Green and Orange to be taped back
at this end and also at other end.
DOOR STATION - CABLE TERMINATION
NOTE: Outer shield should
be insulated.
