Section 4 | Configuration and Operation
© 2022
– Valeport Ltd
Page | 12
4.6 Sampling Regime
# code
Followed By:
Operation
S
<CR>
Performs Single measurement
M
rate<CR>
Performs continuous measurement at set rate. If rate is
omitted then instrument performs continuous
measurements at previous rate.
1,2, or 4 Hz
#039
;ModeValue<CR>
Set mode without putting unit into run mode
Where
Mode = M
Value = 1,2 or 4 for Normal mode (M)
Mode = S for serial trigger single shot measurement
Mode = T for TTL trigger measurement
#040
<CR>
Read operating mode.
#028
<CR>
Puts unit into run mode
4.7 Output Format
See section 4 for detailed description of output formats
# code
Followed By:
Operation
#089
<CR>
Reads current output format
#082
;SDDBT<CR>
;TRITEC<CR>
;BENTHOS<CR>
;NMEA<CR>
