Hyperion Optical Sensors - Operating Manual:
MANUAL-360093108-14 | issue: 2.1
Page | 27
©
2023
–
Valeport Ltd
10
Software
10.1
Valeport Configure App
Available since April 2021 Configure is a generic app into which you load an instrument specific
configuration file that allows you to interact with and set up that instrument. A configuration file can
be saved to load into other instruments or as a company specific configuration. Special
configurations can be set up and associated with a button such as ‘Configure for EnviroLog’ see
section 0 that will set the Hyperion up for operation with an EnviroLog system.
Configure is available from Valeport.Download search for Hyperion from the dropdown list
download and install, the software is licence free.
The Configure App will check for the software installed on the device and alter the functionality
available as required.
As a minimum you must have version 0903707 or higher to use the App. If not, you will see a
warning: "Warning! 0903707 Firmware Required"
Contact Valeport for information on how to upgrade your firmware should it be required.
There is a separate installation manual available for the Configure App available on the Valeport
website