701
Thermo H plus
7 Servicing
7
Servicing
7.1
General
The safety information and regulations (see
) must
be observed.
7.1.1 Heater servicing
For risk of overheating, the battery main current may not be
disconnected, while the heater is operating or in run-down.
Make sure that the circulating pump is running while the
heater is switched on for tests/inspections.
7.2
HV heater servicing
The necessary service work can be found in the main
-
tenance plan for the Thermo AC/DC heater series. This
can be downloaded from the Valeo homepage in the
Service/Downloads/Heating Systems/Thermo AC DC
section.
7.3
D heater servicing
Information on necessary service work for the D heater is
contained in the Workshop Manual for the Thermo plus
heater series, Chapter 7. See also
Danger to life and health!
Warning!
Summary of Contents for Thermo H 160
Page 47: ...memos...
