609
Thermo H
6 Wiring diagrams D heater
6.3
D heater
The minimum cable cross-sections indicated in the table
must be applied.
* The cable cross-section is to be reduced to 2.5 mm²
in front of the heater
* Note for F2: The max. possible for the design value is shown.
The fuse is to be adapt under circumstances acc. to
the smaller cable cross section of the connected
circulating pump.
NOTE:
The vehicle fuses must be installed in such a way that their ambient tem
-
perature does not exceed 60 °C.
Cable length <7.5m
Cable length 7.5 - 15m
0.75 mm²
1.5 mm²
2.5 mm²
4.0 mm² *
Summary of Contents for Thermo H 160
Page 47: ...memos...
