Faults, troubleshooting, repairs
Thermo DC 200
14
7
Faults, troubleshooting, repairs
ATTENTION:
If a safety switch has been triggered, this should only be reset after
a qualified electrician has determined the cause of the fault and
eliminated the error.
The opening of the appliance, troubleshooting and repairs must
only be carried out by a qualified electrician. In all cases the hea-
ting appliance must be disconnected from the mains.
NOTE:
Damaged or defective components should only be replaced with identi-
cal components.
ATTENTION:
The temperature limiter is triggered at 125°C and interrupts the
heating process. To reset you must activate the reset button. Prior
to this the heating appliance must be checked for any possible
damage or faults and the cause of the fault established and
eliminated.
High voltage! Danger to life!
Warning!
Summary of Contents for THERMO DC 200
Page 4: ...IV Thermo DC 200...
Page 34: ...Technical data Thermo DC 200 30 For notes...
Page 35: ...memos...
