Remote Control
3. Installation and vehicle type
Vehicle type
Install
This button is used to select the system mode. Default mode is normal
operation. When this button is pressed once, the mode is changed to angle
adjustment mode. When pressed again, it changes to signal test mode. When
pressed again, it returns to normal operation mode.
This button is used to set the vehicle type. Make sure that it is set correctly; a faulty
setting can undermine the performance of guideo™.
The vehicles are classified according to the height of guideo™’s attachment and the
vehicle width
*Installation height
(1) Passenger Car : 110 cm ~ 125 cm
(2) SUV1 : 125 cm ~ 145 cm
(3) SUV2 : 145 cm ~ 160 cm
(4) Bus : about 170 cm
(5) Truck : about 195 cm
When first pressed, the current setting is announced. When pressed repeatedly,
the vehicle type changes. If the proper type is selected, stop pressing and the vehicle
type will be changed. (The height is the distance between ground and the camera
lens of guideo™ when properly installed.)
