After
is pressed, but setting
has failed.
After
is pressed, and setting
is accepted
After
is pressed, and setting
is accepted.
Functions
•
6. Message & Display
Install mode
Set vehicle
speed
Category
Event
LED
Comments
Message
After
is pressed in turn signal
test mode.
After
is pressed in normal
Mode.
When the angle is out of position.
When the angle is adjusted correctly.
Start of angle adjustment mode
Start of turn signal test mode
Start of normal mode
Example
Left value: Y-axis acceleration
Right value: Z-axis acceleration
INS1
05:03.
00:00.
Default mode After
is pressed briefly.
"Ding-dong"
After
is pressed in angle
adjustment mode.
INS2
"Ding-dong"
"Ding-dong-deng"
Angle
Adjustment
mode
"Ding-dong"
"Press the button again for 3 seconds
if you want the default setup."
After is pressed for 3 seconds.
"Default mode"
REST
Reset all user settings.
"Ding-dong-deng"
"BBig"
VSON
VSER
Vehicle speed is too low.
Set left
warning point
After
is pressed, but setting
has failed.
"Ding-dong-deng"
"BBig"
LPON
LPER
Invalid left warning point.
Set right
warning point
After is pressed, and setting
is accepted
After is pressed, but setting
has failed
"Ding-dong-deng"
"BBig"
RPON
RPER
Invalid right warning point.
