34
Drain and filtration
Before performing the filtering procedure the device
must be stopped with the main switch to “0” position.
A) Check that the filter is placed over the oil bucket
Filter hot oil but let it cool to 60°C, at least 5 minutes, to avoid risk of
burns. See health and safety catering sheet #17
B) Release the drain-valve safety catch to open the red drain valve
(behind the door), and close once all oil has passed through the filter.
Check that the valve is properly locked after draining!
C) Replace the filtered oil back into the tank or first clean
the tank and heating element (see next paragraph)
D) If you have a microfilter, place it on your tank and pour
the oil into it. N.B: the oil temperature must not exceed 40°
(see opposite)
E) Clean the microfilter with hot soapy water.
Follow local regulations regarding the disposal of waste oil!
MAX
40°
