4.
Debugging Mode (16):
When the solar panel voltage is higher than the ‘light control off’
voltage, switch off the load immediately; when the solar panel voltage is lower than the
‘light control on’ voltage, switch on the load immediately.
5.
Normal On (17):
The energised load keeps in output state. This load setting is suggested for
all applications except solar lighting which requires the dusk/dawn switching.
0
Pure light control mode
9
Light c time control (9h)
1
Light c time control (1h)
10
Light c time control (10h)
2
Light c time control (2h)
11
Light c time control (11h)
3
Light c time control (3h)
12
Light c time control (12h)
4
Light c time control (4h)
13
Light c time control (13h)
5
Light c time control (5h)
14
Light c time control (14h)
6
Light c time control (6h)
15
Manual mode
7
Light c time control (7h)
16
Debugging mode (default)
8
Light c time control (8h)
17
Normal on mode
In the load mode menu, long press
for 2 seconds, and the number (e.g. 15) will begin to flash.
Press
to adjust the mode (from 0 to 17), and then long press
for 2 seconds to complete
and save the setting.
After parameter adjustment, if
is not pressed and held long enough for exiting, the
system exits to the main menu after 12 seconds, and the parameter that was set is not
saved.
When the system is saving data, the screen may shake slightly. This is normal and the user
may ignore it.
When connected to a 24V or 48V system, the solar panel terminal voltage may exceed the
limit for human safety. If operation is to be performed, be sure to use insulated tools and
keep your hands dry.
If the battery is connected in reverse polarity, the controller itself won’t be damaged, but
the load end will have a negative voltage output, which may damage your load device. Extra
care should be taken to ensure the polarity is connected correctly to ensure nothing is
damaged.
Incorrect connection of batteries or bare terminals could cause the battery to short circuit.
It’s recommended to use the correct circuit protection devices to prevent this occurring.
Keep the battery away from fire sparks, as the battery may produce flammable gas.
Keep children away from the battery and controller.
Follow the safety advice provided by the battery manufacturer.
Summary of Contents for SRA V30
Page 1: ......
