Day Recognition
Steady On
Day Time
Night Recognition
Steady On
Night Time
Solar Panel
Steady On
Solar Panel Indication
Charging
State
Steady On
Boost Charging
Steady On
Float Charging
Steady On
Equalise Charging
Battery
Quick Flashing
Battery Overvoltage
Slow Flashing
Battery Over-discharge
Battery
SOC
4 Dashes
100%
3 Dashes
75%
2 Dashes
50%
1 Dash
25%
0 Dashes
0%
Load
Steady On
Load Turned On
Steady On
Load Turned Off
Quick Flashing
Overload or Short-circuit Protection
1.
Pure Light Control (0):
When sunlight disappears, and the light intensity drops to the starting
point (light control off), the controller initiates a 10 minute delay (settable) to confirm the
starting signal, and then switches on the load for operation. When sunlight emerges, and the
light intensity reaches the starting point, the controller initiates 1 minute (fixed) delay to
confirm the shutting down signal, and then shuts down the output to stop the load’s
operation.
2.
Light C Time Control (1 to 14):
the starting process is the same as pure light control.
After operating for a pre-set period of time (settable from 1 to 14 hours), the load stops
operation automatically.
3.
Manual Mode (15):
In this mode, the user can switch the load on or off by the keys, no
matter whether it’s day or night.
Summary of Contents for SRA V30
Page 1: ......
