background image

 

 

 

Automatic system voltage identification. 

 

Charging programmable to either SLA, Gel, FLA or Lithium Phosphate. 

 

An upgraded 3-stage PWM charging algorithm along with the correct battery charging 
algorithms for each battery technology has be

en adopted, thus extending the battery’s 

service life. 

 

Temperature compensation is included to increase battery service life (excluded from the 
Lithium Phosphate battery charger setting). 

 

A wide range of load working modes facilitates the product into multiple applications 
including street lights with its load control.  

 

The product provides overcharge, over-discharge, overload protection, as well as short-
circuit and reverse-connection protection. 

 

By virtue of an advanced load starting method, large-capacitance loads can be started 
smoothly.  

 

A range of parameter settings and power-down saving functions are available. 

 

The product provides a dot matrix graphic LCD screen and a human-machine interface with 2 
keys.  

 

The user-friendly design of browser and dynamic interfaces ensures convenient and intuitive 
operations. 

 

 

 

 

 

 

 

Summary of Contents for SRA V30









Reviews: